Turnbuckles
American Open Body Hook & Eye Turnbuckle (Hook & Eye Type) — Hook & Eye (5/8 - WLL 0.8T)
American open-body turnbuckle, 5/8" size, hook-and-eye ends, rated WLL 0.8 ton (800 kg). Electro-galvanized finish—for wire rope, chain and cable tensioning with quick hook-on at one end in construction, telecom and port lashings.
Request a Quote1. Product Overview
This is an industrial-grade American open-body hook-and-eye turnbuckle (rigging turnbuckle / spiral tensioner) with a closed eye at one end and an open hook at the other, rated for a working load limit (WLL) of 0.8 tons (800 kg) at nominal 5/8" size—significantly higher safe capacity than a typical JIS 0.7T unit at the same 5/8" size. Built to US-standard high-strength rigging practice, rotation of the open center frame drives opposite-hand threaded rods to extend or retract together for precise straight-line tensioning of wire rope, chain or tie rods. Full corrosion protection suits construction stays, medium equipment anchoring and permanent industrial bracing indoors and outdoors.
2. Key Features & Design Highlights
- American open-body frame: Classic open oval body with a wide central window—installers can visually check thread engagement on both rods to confirm safe thread length and eliminate hidden over-extension.
- Opposite-hand threads: Left and right internal threads in the frame—turn the body clockwise or counter-clockwise to tighten or loosen both ends simultaneously with minimal effort.
- Hook & Eye ends: Closed forged eye at one end locks the anchor under multi-directional sway or wind load; open hook at the other allows fast engagement on lugs, eyes or shackles without disassembly.
- 5/8" size, WLL 0.8T: Heavy 5/8" body with US-standard steel and deep thread pitch—800 kg WLL for sustained tension on medium-duty wire rope and cable runs.
- High safety margin: Designed to US-standard breaking-strength ratios for outdoor tension systems subject to gust loads and sustained high pull.
- Electro-galvanized finish: Bright silver zinc protection outdoors with a smooth, even coat that preserves free thread engagement without binding.
3. Primary Applications
- Building steelwork stays, shade-structure edge lines and temporary alignment cables during erection.
- Guy wires and stay ropes on telecom towers, power poles and specialty inverted frames—steady tension under wind load.
- Port, vessel deck and freight lashings where the hook end enables fast hook-on/off during loading cycles.
- Large greenhouse main wire tensioning and forestry or mining cable line fine adjustment at the terminal end.
4. Specifications
| Product Type | American open-body hook & eye turnbuckle |
|---|---|
| End Fittings | Hook & Eye (one hook, one eye) |
| Standard Reference | US standard open-body type (medium-to-heavy duty) |
| Nominal Size | 5/8" |
| Working Load Limit (WLL) | 0.8 T (0.8 TON / 800 kg) |
| Material & Process | Quality steel, formed, heat treated and precision threaded |
| Finish | Electro-galvanized (bright silver) |
| Adjustment | Center body rotation, opposite-hand threads |
Safety Guidelines
- Not for vertical lifting—WLL is 0.8 ton for tensioning only. Do not use as a crane hook terminal, hoist assembly or manned lift component.
- Open hook has no safety latch—keep the line under tension in service; slack or heavy sway can allow the hook to disengage. Inspect regularly.
- Maintain adequate thread engagement—keep at least about 1.5× thread diameter of rod inside the body when extended; never load with only a few threads engaged.
Related Products
Request a Quote
Fill in the form below and our team will respond with pricing and lead time. You can also reach us via WhatsApp at +86 15832070517.